# Commission Implementing Regulation (EU) No 901/2014 of 18 July 2014 implementing Regulation (EU) No 168/2013 of the European Parliament and of the Council with regard to the administrative requirements for the approval and market surveillance of two- or three-wheel vehicles and quadricycles (Text with EEA relevance), Division Information: on the type-approval procedure chosen in accordance with Article 25(1) of Regulation (EU) No 168/2013


A duly completed version of this statement shall be included in the information folder.
The undersigned: [… (full name and position)]
Company name and address of the manufacturer: …
Name and address of the manufacturer’s representative (if any): …
Hereby applies for type-approval procedure(4):
(a) step-by-step type-approval
(b) single-step type-approval
(c) mixed type-approval
Where procedures (a) or (c) are chosen, compliance with requirements as under (b) is declared for all systems, components and separate technical units.
Multi-stage type-approval chosen in accordance with Article 25(5) of Regulation (EU) No 168/2013: yes/no(4)
Information on the vehicle(s) to be filled in, if application is for EU whole-vehicle type-approval(3) :
0.1. Make (trade name of the manufacturer): …
0.2. Type(17): …
0.2.1. Variant(s)(17): …
0.2.2. Version(s)(17): …
0.2.3. Commercial name(s) (if available): …
0.3. Category, subcategory and sub-subcategory of vehicle(2): …
Information to be filled in, if application is for type-approval of a system/ component/separate technical unit(3)(4) :
0.7. Make(s) (trade name(s) of manufacturer): …
0.8. Type: …
0.8.1. Commercial name(s) (if available): …
1.6. Virtual and/or self-testing(3)
1.6.1. Overview list with virtual and/or self-tested systems, components or separate technical units pursuant to point 6 of Annex III to Commission Delegated Regulation (EU) No 44/2014 below:
Overview table virtual and/or self-testing
Commission Delegated Regulation (EU) No 134/2014 of 16 December 2013 supplementing Regulation (EU) No 168/2013 of the European Parliament and of the Council with regard to environmental and propulsion unit performance requirements and amending Annex V thereof (OJ L 53, 21.2.2014, p. 1).
Delegated act
Annex
Subject
Virtual and/or self-tested: yes/no(4)
Commission Delegated Regulation (EU) No 134/2014
IX
Testing procedures on maximum design vehicle speed
Self-testing: yes/no(4)
Commission Delegated Regulation (EU) No 3/2014
II
Audible warning devices
Self-testing: yes/no(4)
Commission Delegated Regulation (EU) No 3/2014
VIII
Driver-operated controls including identification of controls, tell-tales and indicators
Self-testing: yes/no(4)
Commission Delegated Regulation (EU) No 3/2014
IX
Installation of lighting and light- signalling devices
Virtual testing: yes/no(4)
Commission Delegated Regulation (EU) No 3/2014
X
Rearward visibility
Virtual testing: yes/no(4)
Commission Delegated Regulation (EU) No 3/2014
XIV
Installation of tyres
Virtual testing: yes/no(4)
Commission Delegated Regulation (EU) No 44/2014
XIV
Registration plate space
Self & Virtual testing: yes/no(4)
Commission Delegated Regulation (EU) No 44/2014
XVI
Stands
Self-testing: yes/no(4)
This Commission Implementing Regulation
VIII
Statutory plate and EU type-approval mark
Self-testing: yes/no(4)
1.6.2. Detailed report on validation of virtual and/or self-testing added: yes/no(4)
Place: …
Date: …
Signature: …
Name and position in the company: …

---
Source: https://www.legislation.gov.uk/eur/2014/901/attachment/1/attachment/division/division/PART A/division/2./division/Information (the official version)
Page: https://openlegislation.uk/eu-regulation-2014-901/attachment-1/attachment/division/division-PART A/division-2./division-Information
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.